Fuses
The fuses for the rotary motor and Feed Controller are located inside the junction box.
Items Required
20 A blade fuse (rotary motor)
2 A blade fuse (Feed Controller, AeroCUBE serial SC00001–SC00008)
3 A blade fuse (Feed Controller, AeroCUBE serial SC00009 and higher)
Tools Required
Phillips screwdriver
Opening the Junction Box
Loosen the four screws securing the lid and then open the lid.
Fuse Location
The following image shows the location of each fuse inside the junction box.
Ref | Component | AeroCUBE Serial # | Fuse Rating |
|---|---|---|---|
1 | Feed Controller | SC00001–SC00008 | 2 A |
1 | Feed Controller | SC00009 and higher | 3 A |
2 | Rotary motor | All | 20 A |
Inspecting a Blade Fuse
The following image shows a good blade fuse and a blown blade fuse.
Gently pull the fuse straight out of the fuse holder.
Examine the fuse element to determine whether the fuse is good or blown.
If the fuse is blown, replace it with a fuse of the same rating.
Close the junction box lid and tighten the four screws.